SC57 speedometer wires

  • I've come a bit further - my SP is apparently sending a 5V signal not a 10V or 12V signal that I understand the CBR wants (I've seen the tacho work on a VTR1000F which is sending a 12V pulse).

    Soooo, has anyone taken a oscilloscope to the tacho on the SC57 or similar? Need to figure out if the pulses are identical, except for the voltage, which could then be fixed with a converter.

    hey guys,

    comming back to this topic … did anyone ever measure the rpm signal with an oszi? And if, could the one please share the signal here?

    Thanks in advance!

  • Am DZM positiver Rechteckpuls 10 Volt, 2Pulse/rpm.

    scribere non curo ego dolentes quod aliquis fals

    Vorsicht!

    Das lesen meiner Beitraege erfolgt auf eigenes Risiko und eigene Gefahr!

    Sollte jemand zu Schaden kommen übernehme ich keine Haftung!

    Ach so, : „Wenn du Gott siehst, dann musst du bremsen“